P38 magazine: AC40 standard 3rd variation

The “ac40 standard” pistol variation is similar to the earlier “ac40 added” pistol variation, except that the 40 was stamped below the ac marking on the slide rather than engraved. The range of serial numbers for the “ac40 standard”pistol variation is about 5900a to 10000b. Three magazine variations can be found in this range.

The magazine shown here is a 3rd "ac40 standard" magazine variation and was issued with "ac40 standard" pistols starting from serial number 7300a up to the end of 1940 (serial number 10000b).

P.38 is stamped on the left side of the housing. The spine is stamped with two E/359 inspection markings. The previous magazine variations had those markings stamped next to eachother at the bottom of the spine. This variation has the E/359 acceptance stamp on the lower right of the spine relocated toward the top of the spine. The other E/359 at the lower left of the spine remained in the same location as the previous magazine variations.

P38 Magazine Walther AC40 Standard 3rd variation leftP38 Magazine Walther AC40 Standard 3rd variation splineP38 Magazine Walther AC40 Standard 3rd variation right

P38 Magazine Walther AC40 Standard 3rd variation internals